cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
338
Views
5
Helpful
2
Replies

CUCM "DIAL-PEERS"

isaaco001
Beginner
Beginner

Hi everyone,

 

I am familiar with CME and would like to understand the equivalent of dial-peers in CUCM. I trying to connect a CME to a CUCM through their dial-peers. where are dial-peers configured in CUCM?Am new to CUCM and guides or links to this issue will be appreciated.

 

Thanks!

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee
2 Replies 2

George Sotiropoulos
Cisco Employee
Cisco Employee

Hello Isaac,

 

You may read the following document for interconnection of CUCM with CME:

 

http://www.firewall.cx/cisco-technical-knowledgebase/cisco-voice/922-cisco-voice-cucm-cme-h323.html

 

Generally speaking, you will need to create connetivity (H323 or SIP trunk) between the 2 systems and then create route-patterns, which are the equivalent of the dial-peers on the CME.

 

You will find various posts at Community concerning this subject.

 

Hope this helps,

George

 

 

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

You want to do some reading on this:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: