The phones in the two sites are registered on the Router GKA (SiteA) and GKB (SiteB). Those Routers are also CME and Gatekeeper. The RSVP reservation between the two sites works perfectly. When one of the two sites wants to make a call into the head office, the call gets forwarded to a Directory Gatekeeper and then delivered to the Gatekeeper in the head office.
The phones in the head office however are registered on a CUCM 6.0. I configured all the stuff you have to do on the CUCM: Dialpattern, Router / Gatekeeper in the head office is registered as a Media Termination Point, MRG, MRGL, the necessary location profiles are assigned to the phones and the RSVP reservation is set to "Mandatory".
When I try to make a call, the phone tells me that there is "not enough bandwidth" even though the bandwidth is set to "unlimited". I didn't figured out a way to successfully establish a RSVP reservation.
It would be nice if you could help me with a solution, but if not … I have another, simpler, question:
Is it even possible for the CUCM to make a RSVP reservation from one site to another when not all phones are registered with this CUCM?
Today, Cisco announced new advances for meetings. A couple of insights:
1. Scheduling meetings is even easier
2. New video devices
3. New headsets
Click here to learn more about these exciting advances in Cisco meeting technolog...
How does the phone registered in CUCM environment?
-The phone will obtains power via PoE or AC adapter.-The phone will loads its locally stored firmware image.-The phone learns the voice vlan id via cdp from the switch.-Via...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about the concepts, best deployment practices and troubleshooting tips for Webex Hybrid services. Ask qu...