cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
221
Views
5
Helpful
1
Replies
Highlighted
Beginner

CUCM Services

Hi all..

Is there anyway in CUCM to check if a service was active before,,,

To Put in a scenario,,

A person reports Cisco Messaging Interface Service is down, but i would like to check if the service was up before..

Thanks in advance..

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advisor

You would need to check the system logs on the server to see if there was an alert.  In this particular case, CMI is (in my experience) rarely used unless you have an integration with a 3rd-party voicemail system that has an SMDI interface.

Hailey

Please rate helpful posts!

View solution in original post

1 REPLY 1
Highlighted
Advisor

You would need to check the system logs on the server to see if there was an alert.  In this particular case, CMI is (in my experience) rarely used unless you have an integration with a 3rd-party voicemail system that has an SMDI interface.

Hailey

Please rate helpful posts!

View solution in original post