08-16-2018 03:20 PM - edited 03-17-2019 01:21 PM
I just noticed that all these option ping packets from the CUCM to the CME are all tagged with no DSCP values (or 0x00). How do I set it to CS3, so it will be the same as other VoIP signalling relevant traffic? I have checked the enterprise parameters and they look right to me.
I also don't see anything DSCP relevent settings under the SIP trunk or the SIP trunk profile config... Please help. Thanks!
Solved! Go to Solution.
08-24-2018 06:07 AM
08-17-2018 04:23 AM
There is no special marking for options ping. It should be marked as every other sip traffic on port 5060 as cs3
08-23-2018 02:59 PM
Hi Ayodeji, thanks for the reponse and sorry for the delay.. I am seeing the traffic as DSCP 0. Is it abnormal? I will double check my switch to make sure thta they are not doing any markings. Thanks
08-24-2018 06:07 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide