02-11-2021 07:47 AM - edited 02-11-2021 07:48 AM
Hello all,
Is there a way to see how many calls pass through a specific CUCM SIP trunk link ?
Regards,
Rémi
Solved! Go to Solution.
02-11-2021 05:40 PM
You can view a graph of active calls on a SIP trunk in RTMT. Login to RTMT then navigate to system and performance. Open the cucm node your SIP trunk is registered to and then Cisco SIP. Open Cisco SIP and you'll see a number of options, one of them being active calls. Click on active calls and another box will open listing your SIP trunks. Select the trunk you want to view and the graph will appear showing the active call count. I hope that helps.
James
02-11-2021 05:40 PM
You can view a graph of active calls on a SIP trunk in RTMT. Login to RTMT then navigate to system and performance. Open the cucm node your SIP trunk is registered to and then Cisco SIP. Open Cisco SIP and you'll see a number of options, one of them being active calls. Click on active calls and another box will open listing your SIP trunks. Select the trunk you want to view and the graph will appear showing the active call count. I hope that helps.
James
02-15-2021 12:05 AM
Thanks for your help James !
01-22-2024 10:01 AM
Thank you so much for that, very helpful.
To clarify for anyone else who is slow like me and was looking for "System and Performance" as a single menu in the RTMT, it isn't. It is located under the 'System' tab -> 'Performance' (which is under the 'Performance' header on the left panel) -> the rest of the directions were straight forward after that.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: