cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
545
Views
0
Helpful
1
Replies

CUCM Syslog Message ISSUE (kernel: Exceeded hashlimit)

Young Chan Lee
Level 1
Level 1

Hello.

Our Customer using CUCM 9.0 (PUB :1 , Sub : 4) and 4 Voice Gateway Cisco 3945 (16 E1 PRI per each Gateway)

CUCMs have problem with syslog messages.

I saw these messages in rtmt syslog

- kernel:  Exceeded hashlimit IN=bond0 OUT= MAC=34:40:b5:d5:63:e8:1c:e6:c7:52:44:40:08:00 SRC=130.1.254.27 DST=130.1.13.11 LEN=204 TOS=0x00 PREC=0x00 TTL=246 ID=19646 PROTO=UDP SPT=19200 DPT=30546 LEN=184

kernel:  Exceeded hashlimit IN=bond0 OUT= MAC=6c:ae:8b:67:1a:28:bc:16:65:12:99:7f:08:00 SRC=130.1.254.27 DST=130.1.14.13 LEN=204 TOS=0x18 PREC=0xA0 TTL=253 ID=42621 PROTO=UDP SPT=26694 DPT=26842 LEN=184

What's the problem with these messages ?

And how can I solve this problem

Thanks.

1 Reply 1

cesar-trejo
Level 4
Level 4

I used to have the same problem, it was a sip trunk against to one CME, just reset the sip trunk in CUCM it fixed the error. it is because the end poing is sending a lot of requests to CUCM

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: