CUCM temperature problem

[sangin079]

Hi all,

I have a problem about CUCM.

admin:show environment temperatures

ID      Temp            Type            Threshold
1       33C             Threshold       70C
2       17C             Threshold       39C
3       255C            Threshold       127C
4       255C            Threshold       127C
5       38C             Threshold       77C
6       -*              Threshold       127C
7       -*              Threshold       127C

As you can see, there's some problem on the ID 3,4.

Temperature has exceeded the limit.

Have you ever seen the experience this problem?

[paolo bevilacqua]

Contact the TAC, if the sensors failed, you may need an hardware replacement.