cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
816
Views
0
Helpful
6
Replies
Participant

CUCM upgrade from 7.0 to 8.0(3)

Hi

I am planning for Upgrade CUCM 7.0 to 8.0(3).

Does anyone has upgradation documentation for CUCM from 7.0 to 8.0 upgrade?

I am not able to find it out in Cisco site.

Present version 7.0 is running on MCS-7835. It is NOT on VM.

Upgradation to version 8.0, Is there any VM ESX required in this upgradation?

Any precaution required on installation/licensing part during upgradation from 7.0 to 8.0?

Is it same as upgradation from 6.x to 7.x or different?

Waiting for suggestion.

Rgds

Rajesh

6 REPLIES 6
Hall of Fame Cisco Employee

Re: CUCM upgrade from 7.0 to 8.0(3)

All the information is in the documentation section, from www.cisco.com -> Support -> Install & Upgrade.

There are plenty of requirements for the virtualization option and you need to meet all of them for it to be supported

Installing Cisco Unified Communications Manager on Virtualized Servers

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/virtual/servers.html

Software Upgrades

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/cucos/8_0_1/cucos/iptpch7.html

Table 6     Supported Cisco Unified Communications Manager Upgrades for Release 8.0(2c)SU1 through 8.0(x)

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp286194

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Participant

Re: CUCM upgrade from 7.0 to 8.0(3)

Hi

Is virtualization is MUST while upgrading CUCM from 7.0 to 8.0(3) ??

Rgds

Rajesh

Highlighted

Re: CUCM upgrade from 7.0 to 8.0(3)

No; VMware-based virtualization is not required, only an option.

Participant

Re: CUCM upgrade from 7.0 to 8.0(3)

Hi Jonathan Schulenberg
Thanks a lot, pls. clarify this,
Only on UCS hardware we have option of virtualization for CUCM 8.x onwards.
For upgrdation on MCS-7835 from 7.x to 8.x no need of virtualization and normal upgradation, correct?
Upgradation procedure is like, insert upgradation DVD and proceed with upgradation what we used to do it for 6.x to 7.x, correct?

thanks
Beginner

Re: CUCM upgrade from 7.0 to 8.0(3)

Hello Rajesh,

As per: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp43011

Table 6 states that if you want to upgrade to 8.0.3.10000.8 you can do a direct upgrade from the following 7.x versions:

7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a,  7.1(3a)SU1, 7.1(3a), 7.1(3), 7.1(2b)SU1, 7.1(2b), 7.1(2a)SU1, 7.1(2a),  7.1(2), 7.0(2a)SU3, 7.0(2a)SU2, 7.0(2a)SU1, 7.0(2a), 7.0(2), 7.0(1)SU1a,  7.0(1)SU1, 7.0(1)

Hope this helps,

John

Participant

Re: CUCM upgrade from 7.0 to 8.0(3)

Hi

One question:

Upgrade DVD I received from Cisco mentioned "Bootable and Upgrade DVD from 7.x to 8.x"

Usually there will be ISO file ex:UCSInstall_UCOS_X.X.X.X.X.sgn.iso for upgradation.

But I don't see those ISO files in this DVD. Is it right DVD for upgrade from 7.x to 8.x?

Which file from this DVD, CUCM uses for upgrade from 7.x to 8.x?

Here I have attached the screenshot of the DVD files.

Pls. advice.

Thanks

Rajesh

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards