cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
551
Views
0
Helpful
2
Replies

CUCM Video Registered Endpoints Making Video Calls Using an IP Address

jriacono5
Beginner
Beginner

Hello,

We have several video endpoints registered to CUCM that has an integration with VCS-C/VCS-Expressway. We want to make outbound calls to H323 endpoints on the internet using an IP address. Would this be done using a SIP route pattern in the CUCM configuration? Could someone explain how this can be accomplished?

 

Thanks,
James

2 Replies 2

George Thomas
Advocate
Advocate

Unfortunately CUCM doesnt support IP address dialing. You could do the workaround mentioned in the appendix of the document: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.pdf

Please rate useful posts.

Anas Abueideh
Engager
Engager

Hi,

to dial ip address you need to register the endpoint in the VCS.

from CUCM you can dial digts and URI.

HTH

Anas

don't forget to rate the helpful posts

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: