07-25-2013 02:24 PM - edited 03-16-2019 06:33 PM
Good afternoon everyone,
My client asked me if it is possible to set a warning tone to let users know that the call is taking too long. I know the call duration can be set up, is this related to that?
Thanks for the help in advance.
Bruno
Solved! Go to Solution.
07-25-2013 02:54 PM
No, CUCM doesn't have any feature like that.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
07-26-2013 04:34 AM
You could do this with a TCL script on the voice gateway though. Since it already has a DSP invoked for the call that would be the easiest spot to inject audio.
http://www.cisco.com/en/US/docs/ios-xml/ios/ios_tcl/configuration/12-4t/nm-script-tcl.html
Please remember to rate helpful responses and identify helpful or correct answers.
07-25-2013 02:54 PM
No, CUCM doesn't have any feature like that.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
08-07-2013 08:35 AM
Thanks for the help Jaime.
Sent from Cisco Technical Support iPhone App
07-26-2013 04:34 AM
You could do this with a TCL script on the voice gateway though. Since it already has a DSP invoked for the call that would be the easiest spot to inject audio.
http://www.cisco.com/en/US/docs/ios-xml/ios/ios_tcl/configuration/12-4t/nm-script-tcl.html
Please remember to rate helpful responses and identify helpful or correct answers.
08-07-2013 08:34 AM
Thanks for the help Jonathan. It helps a lot.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: