Not alot of recent information on this config but we did manage to get the 3905 series to do a PLAR to a door intercom device. All was working well except for a small delay between pickup and actual dialout. A different user was trying to reconfigure another 3905 and may have made a subtle, not obvious change to the Partition and/or CSS. At this time the PLAR phone now gets a dialtone on pickup and it will not auto-dial the intercom. If the user manually dials the intercom extension it will connect.
The partition has only two entries with one device in each; a CSS and a Translation Pattern. All looks just as it did before but obviously is not working like it did before. Any tips on how to diagnose what is happening? As I was raised on 4.0 and this is 8.5 I am hesitant to play around with settings, etc. unless advised to do so, especially in this PLAR configuration...
Mike
