06-02-2011 08:48 AM - edited 03-16-2019 05:16 AM
Does CME / CUCME 8.5 support Single Number Reachability (SNR) with a SIP Diversion Header, so that the original calling-id can be presented to the phone that SNR sends the call to?
06-10-2011 04:54 PM
CUCME support SNR with SIP Diversion Header. Mostly the issue is other way around with telco SIP Provider. Please get in touch with provider to ask if they support call forward on SIP trunk with different caller ID other than the ranger they provided and can do authentication based on SIP Diversion Header
06-13-2011 09:23 AM
When I perform a debug, I don't see anything in the Diversion Header from CME. The provide supports this, but needs the Diversion Header there.
06-10-2011 05:01 PM
Hi
Your issue is similar to the post at
https://supportforums.cisco.com/message/3366544#3366544
Please cross refernce.
HTH
Tapan
07-05-2011 04:46 PM
That article is for CUCM, not CUCME. I understand the SIP Diversion Header, and how it works. The issue that I am having, is that CUCME v.8.5 is not placing anything in the SIP Diversion Header.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: