CUE CLI - Setup outgoing call to display their own DID.

RYN0 · ‎12-20-2017

First off, i am really new to VoIP setups on Cisco devices.

So, I managed to figure out a way to set a specific user's extension to be reach from an external called, on a specific DID. So, if i called this guy from wherever, outside his office, at his number of XXXXXXXXXX, it translates to his internal extension just fine, and rings his phone.

What I am having trouble with now is when he wants to call outbound. He wants his DID to show up in the caller ID of whomever he is calling. Currently, it displays the office's main phone number instead, in the caller ID of whomever he calls. I am at a loss on how to make this work unfortunately. Here is some of the relevant config that is currently in place. If anyone can assist, that would be great.

dial-peer voice 48 pots
trunkgroup ALL_T1
description Mike_Burns-DID
translation-profile incoming Mike_Burns-DID_27
incoming called-number XXXXXXXXXX

direct-inward-dial
no sip-register

voice translation-profile Mike_Burns-DID_27
translate called 27

voice translation-rule 27
rule 1 /XXXXXXXXXX/ /133/

ephone-dn 153 dual-line
number 133
label Mike Burns
name Mike Burns
call-forward busy 399
call-forward noan 399 timeout 19
mwi sip

ephone 51
mac-address C414.3C8A.F8E2
username "burnsm" password 1234
speed-dial 1 600 label "park"
type 6941
button 1:153

Thanks,

Ryan

Mohammed al Baqari · ‎12-20-2017

voice translation-rule 10
rule 1 /$...$$/ /XXXXXX\1/
voice translation-profile xforming_calling
translate calling 10

This will basically prefix digits in front of the extension. For example if the extension is 133 and your DID range is 9191919..., then the calling number sent out will be 9191919133

Finally assign this profile to your outgoing dialpeer

dial-pee voice xx pots
translation-profile outgoing xforming_calling

RYN0 · ‎12-22-2017

The DID does not contain the extension. So I do not think prefixing the DID
range digit in front of the user's extension will work.

Could I just create a rule like this, though:

voice translation-rule 10
rule 1 /133/ /1234567890/
voice translation-profile xforming_calling
translate calling 10

Then apply it to a new outgoing dial peer like this:

dial-peer voice xx pots
translation-profile outgoing xforming_calling

Mohammed al Baqari · ‎12-22-2017

Yup. This shld work