07-17-2015 03:46 AM - edited 03-17-2019 03:40 AM
Gents
I'm going to buy below NM-CUE Module
My question is it possible to upgrade it to 8.6 or there is hardware limitation, also does it support ISR 3845
Cheers
Solved! Go to Solution.
07-17-2015 04:12 AM
Hi Zaher,
As per the following it is not supported.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuemigration.html
You need AIM2-CUE , NME-CUE , SM-SRE or ISM-SRE.
Manish
- Do rate helpful posts -
07-17-2015 04:12 AM
Hi Zaher,
As per the following it is not supported.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuemigration.html
You need AIM2-CUE , NME-CUE , SM-SRE or ISM-SRE.
Manish
- Do rate helpful posts -
07-18-2015 08:26 AM
Thanks Manish,
one last question
I have NME-WAE-502-K9 for WAAS
Is it possible to remove waas and install CUE ?
07-18-2015 11:17 PM
Hi Zaher,
It seems it would work as per the following post
https://supportforums.cisco.com/discussion/11828761/re-install-cue-86
However, i would recommend checking with TAC if this would be supported.
HTH
Manish
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: