if i initiate call from sip app to genesys server with custom field in INVITE message (ClientCode: 123456), i couldn't see it on genesys server. On cisco router i see this field only in INVITE from sip app.
Voice call works fine
sip app - SIP - genesys sip server
in thist topology custom field is recieved on genesys server
dial-peers on router
dial-peer voice 121 voip description **** MOBILE APP *** destination-pattern 7800 session protocol sipv2 dtmf-relay cisco-rtp h245-alphanumeric h245-signal rtp-nte codec g711alaw no vad
dial-peer voice 100 voip description ***GENESYS SIP SERVER*** huntstop preference 3 destination-pattern 9[0,9]. session protocol sipv2 session target ipv4:172.28.240.56 dtmf-relay rtp-nte codec g711alaw no vad
Can you show the complete INVITE please ? You should be able to match the header against a sip profile and use a copy list to add it back when the INVITE is sent out. CUBE does a check and drops unsupported information so what you see if working as designed AFAIK.
Nipun Singh Raghav "We cannot solve our problems with the same thinking we used when we created them"