06-23-2016 06:20 AM - edited 03-17-2019 07:20 AM
Customer wants a line group that rings on mobile devices so we created a line group add some dummy phones with remote destinations going to mobile phones. When the call arrives on the mobile phones they see the original calling number, they want to se the hunt pilot number instead. I have tried to change the calling party transformation on the hunt pilot but that does not work when the call gets to the mobile phones. Any ideas on how to transform the calling number from calls to this hunt pilot.? Maybe using other applications CUC or CCX?
06-23-2016 07:03 AM
Hi David,
On the gateway the call is going out try changing the "Calling Party Selection" and see if it helps.
Any outbound call on a gateway can send directory number information. Choose which directory number is sent:
HTH
JB
06-24-2016 02:06 AM
Hi Jitender,
Thanks for your suggestion, actually it works when calling from external numbers to the linegroup then we get the line group number as calling, but when dialing from internally IP phones we get the calling number from that phone and not the line group number.
And when i debug on the gateway the redireting number is the RD profile and the the hunt pilot number.
/David
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide