cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1026
Views
0
Helpful
3
Replies

- D-Channel Blocked -

keanej
Level 3
Level 3

My ISP says the router is 'blocking out the D Channel'

I am using an MGCP gateway backhauling the ISDN to Call Manager - I am seeing 'path code violations'

yet when the telco puts a loop in the line, it tests clear.

They insist is it the CSU (customer service unit - ie the router!)

I am really stumped here... any ideas ??

Bascially I have 'Layer 1 - Deactivated / Shutdown' with multiple path code violations

1 Accepted Solution

Accepted Solutions

vivkalra
Level 1
Level 1

This is a definately a Telco related problem.

However to rule out any options from your side you can try configuring it with H323

because D channel is backhauled with call manager in case of MGCP to verify that it is not a call manager issue

you try that with h323 and also make sure we are on the latest IOS on the gateway.

HTH

Vivek

View solution in original post

3 Replies 3

vivkalra
Level 1
Level 1

This is a definately a Telco related problem.

However to rule out any options from your side you can try configuring it with H323

because D channel is backhauled with call manager in case of MGCP to verify that it is not a call manager issue

you try that with h323 and also make sure we are on the latest IOS on the gateway.

HTH

Vivek

I help test H323 - I ACL blocked all communication to Call Manager - triggering SRST -  and the fault was still there

The Telco eventually admitted the problem yesterday.

Thanks for your help

paolo bevilacqua
Hall of Fame
Hall of Fame

Please send "show controllers T1"