04-28-2010 01:53 PM - edited 03-15-2019 10:32 PM
Hello,
I'm trying to run the DMA tool to prepare an upgrade from 4.1.3 to 7.1.3
But when I'm running this tool on the publiser of 4.1.3 it returns an error.
[10:01:55 PM] DMA version is 7.1(3). |
[10:01:55 PM] The tarball generated by this DMA version should only be used for upgrading to CUCM 7.1(3) |
[10:01:55 PM] Local machine name is Amfn30. |
[10:01:55 PM] Local IP Address is 10.5.64.12. |
[10:01:55 PM] Service account is Dmaback_Admin. |
[10:02:18 PM] Dmaback_Admin has local administrative rights. |
[10:02:18 PM] DMA export running in low priority. |
[10:02:18 PM] Export Timestamp is 04-27-10#22-02. |
[10:02:18 PM] Found 39163MB available on the boot partition for staging the export. |
[10:02:18 PM] Free disk space available in D:\ drive is 1761216KB. |
[10:02:18 PM] Checking database connection, this may take several minutes... |
[10:02:21 PM] Database connection test successful. |
[10:02:22 PM] Estimated time to complete DMA export process is about 1 hours 16 minutes. |
[10:02:22 PM] The actual time may vary due to the system's performance and other factors. |
[10:02:22 PM] Beginning Cisco CallManager export from 10.5.64.12. |
[10:02:22 PM] Exporting Cisco CallManager databases. |
[10:02:22 PM] This can take a long time, depending on the size of the databases. Be patient. |
[10:02:22 PM] Previous log files are removed from C:\Program Files\Cisco\Trace\DMA\DB\ successfully. |
[10:02:22 PM] Previous log files are removed from C:\Program Files\Cisco\Trace\DMA\CAR\ successfully. |
[10:02:22 PM] License file initialization completed successfully. |
[10:02:22 PM] Accessing database... |
[10:10:01 PM] Cisco CallManager databases exported successfully. |
[10:10:01 PM] Exporting Cisco CallManager directories. |
[10:10:01 PM] This can take a long time, depending on the size of the directories. Be patient. |
[10:10:01 PM] Accessing database... |
[10:10:43 PM] modExportDatabase=Failure |
[10:10:43 PM] Failed to complete database processing successfully. |
[10:10:43 PM] Failed to export Cisco CallManager directories. |
[10:10:43 PM] Exporting international dial plan files. |
[10:10:43 PM] International dial plan files exported successfully. |
[10:10:43 PM] Exporting Cisco CallManager Attendant Console data. |
[10:10:43 PM] Cisco CallManager Attendant Console data exported successfully. |
[10:10:43 PM] Exporting RTMT reports. |
[10:10:43 PM] RTMT reports exported successfully. |
[10:10:43 PM] Exporting Quality Reporting Tool (QRT) reports from C:\Program Files\Cisco\QRT. |
[10:10:44 PM] Failed to copy C:\Program Files\Cisco\Qrt\Qrt000172.Xml. File not copied to destination folder. |
[10:10:44 PM] The last Exporting Quality Reporting Tool (QRT) report is not exported from C:\Program Files\Cisco\QRT |
[10:10:44 PM] This is expected and is not an error, as the file is currently in use. |
[10:10:44 PM] Exporting Cisco CallManager Registry. |
[10:10:55 PM] Cisco CallManager registry exported successfully. |
[10:10:55 PM] Failed to export Cisco CallManager data. |
[10:10:55 PM] Export information file(s) not saved, due to unsuccessful export. |
[10:10:55 PM] DMA backup process is completed. |
[10:10:55 PM] Review the following logs for more details: |
[10:10:55 PM] 1. DMA Framework logs at C:\Program Files\Cisco\Trace\DMA\DMATracexx-xx-xx.log where xx-xx-xx is the date that the DMA export is performed. |
[10:10:55 PM] 2. Status displayed on this page is stored at C:\Program Files\Cisco\Trace\DMA\DMAStatusxx-xx-xx.log where xx-xx-xx is the date that the DMA export is performed. |
[10:10:55 PM] 3. All database related logs at C:\Program Files\Cisco\Trace\DMA\DB\ |
[10:10:55 PM] 4. Database progress log at C:\Program Files\Cisco\Trace\DMA\Progress\AllProgress.log |
[10:10:55 PM] 5. All directory related logs at C:\Program Files\Cisco\Trace\DMA\DirExport\DirExport*.* |
[10:10:55 PM] 6. All CAR related logs (if any) at C:\Program Files\Cisco\Trace\DMA\CAR\ |
[10:10:55 PM] ******************************************************************************** |
[10:10:55 PM] ******************************************************************************** |
[10:10:55 PM] The results are : Export - Failed. Validation - Failed. |
[10:10:55 PM] ******************************************************************************** |
[10:10:55 PM] ******************************************************************************** |
[10:10:55 PM] It is mandatory to refer to the Post-Upgrade Tasks section of the Upgrading Cisco Unified CallManager to understand and complete all the critical tasks after the upgrade. |
[10:10:55 PM] See document at http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_installation_guides_list.html |
04/27/2010 22:10:24
Error: Error: IO::Socket::INET: connect: Unknown error. Error connecting LDAP=10.13.136.10, port=8404
Condition: LDAP bind failed
Solution: Please note the LDAP error
This is however the old ip address of the server? You can also still find this ip address in the registry.
Does anyone had a simular issue or does know how to resolve this?
Kind regards,
Sven Anthonissen
05-04-2010 08:00 AM
This problem is solved.
This serves was readdressed in the past. And the DMA tools looks at a registry setting for accessing DC Directory.
I changed this registry key to the current ip address of the server and that solved the problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide