Data Replication on CM 8

[Teri.Shaffer]

Is this normal for Callmanager 8.03 database replication?

Below are the results of a system report generated by the Callmanager Pub, version 8.03.   The inserted capture is not very legible but it appears to insert an " i " in front of the hostname.   My hostnames are   428-uccm1 and 428-uccm2.  The hostnames below reads as follows:  "g_i428_uccm1_ccm8_0_3_10000" and "g_i428_uccm2_ccm8_0_3_10000"

[dijohn]

Thats all right

As long as cdr list serv looks the same on both the servers and the state is LOCAL or Connected.

Here's a write up on DBreplication  https://supportforums.cisco.com/docs/DOC-13672

HTH

PS:Rate useful posts.