debug ccsip messages not showing output

[monasir]

Hi all,

Im facing something strange, when im doing " debug ccsip messages" and after that term mon

I don't seeing any output coming by in the cube.

This has been worked before, i was checking the configurution ive noticed the command logging buffered 1000000 was missing.

Configured it but still dont see anything.

no logging queue-limit
logging buffered 1000000
no logging rate-limit
no logging console
no logging monitor

[Dennis Mink]

Yes it can be flaky at times. Do term mon and log your client input and put in logging console

[monasir]

Hi Dennis,

Im not understanding , what exactly do you mean with log your client input?

[Dennis Mink]

So for instance if you use putty. Go to session settings and choose log session so it gets written to a file so you can analyze debug info

[monasir]

Ok clear,

Is there a reason why its not showing the output in the cube?

[Dennis Mink]

Are you making a test call in and running term mon and logging console configured? Whenrunning the debug?

[monasir]

Hi Dennis,

Debug ccsip message is active - term mon

And then im making a test call, like it should be

[monasir]

Still not showing output

[Rajan]

if you are using the below config, then you should use "sh log" command to see logs.

no logging queue-limit
logging buffered 1000000
no logging rate-limit
no logging console
no logging monitor

[monasir · Accepted solution]

logging monitor 7 command fixed the issue.

Conf t

Logging monitor 7

Exit