cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
316
Views
10
Helpful
5
Replies

Debug ccsip messages

aly17
Beginner
Beginner

Hello community ,

I'm debugging a gateway to verify if the international call pass or no , can you help with an output or anything else so I can verify ?

5 Replies 5

b.winter
Advocate
Advocate

Hi, what do you mean with your question?
If you have problems with a call, make a test call and post the output of the debugs here, so other people can help you analyze it.

Nithin Eluvathingal
VIP Mentor VIP Mentor
VIP Mentor

I hope your question is how to debug 

if it’s a isdn pri line use debug isdn q931 

debug voice ccapi inout also give more information 

 

if it’s a sip trunk use debug ccapi messages 

 

 



Response Signature


Maren Mahoney
VIP Advocate VIP Advocate
VIP Advocate

You can also post your debug here along with the calling party information and the international number they are trying to dial. We can help take a look.

Maren

 dial-peer voice 56 voip
--More--   description * Appel InterNational PSTN via Trunk SIP *
translation-profile outgoing outgoing-PSTN
preference 1
destination-pattern ^9T$
session protocol sipv2
session target ipv4:xx.xx.xx.xx
voice-class codec 1
dtmf-relay rtp-nte
no vad

aly17
Beginner
Beginner

Hello , The problem was resolved after debugging the gateway , we haven't observed anything special so we conclude that the problem is due to the operator who is blocking the international call.

Thanks guys !

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers