01-06-2011 08:48 AM - edited 03-16-2019 02:43 AM
I am converting users from an NEC system to CUCM 8.0 and they are requiring a function they call ring delay.
It rings a phone and after a certain amount of rings, rings other phones two more times while still ringing the first phone if no one answers it goes to the Vm of the first phone DN. I can not find any function in call manager that does this except hunt groups. Any ideas.
Solved! Go to Solution.
01-06-2011 10:12 AM
There is no equivalent, as you've found you would need to configure CFNA to s hunt pilot with a broadcast line group that includes the called phone.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-06-2011 10:12 AM
There is no equivalent, as you've found you would need to configure CFNA to s hunt pilot with a broadcast line group that includes the called phone.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide