03-19-2008 10:58 PM - edited 03-15-2019 09:33 AM
receiving error when attempting csim. Trying to configure router for SRST and calls not completing...
csim: called number = 912816740702, loop count = 1 ping count = 0
csim err:csim_do_test invalid major major(16) minor(0)
csim: loop = 1, failed = 0
csim: call attempted = 1, setup failed = 0, tone failed = 0
03-20-2008 01:54 AM
Hi, is this an H.323 or MGCP gateway?
If MGCP the CSIM command won't work as callmanager is in control. What dial-peers have you got configured for SRST?
03-20-2008 07:09 PM
What type of dial-peers voip or pots?
DO you have examples of your dial-peers
03-21-2008 07:49 AM
This is an MGCP gateway, however, the dial-peers are being tested during SRST operation. AN example of a dial-peer is:
dial-peer voice 41 pots
tone ringback alert-no-PI
description Outbound Toll-International Calls
destination-pattern 801+
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
clid network-number 2766797020
port 1/0/0
forward-digits extra
prefix 011
Thanks,
Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: