Dial Peer Matches but Outgoing Calls to PSTN through FXO fail on voice gateway
I have an issue with a voice gateway config
We have a SIP Trunk configured from CUCM to a 2811 Gateway with 2 FXO Ports.
Incoming calls on the on the PSTN are routing correctly to CUCM
Outgoing calls from CUCM to the PSTN are failing, when attempting the call the phone give as a fast busy tone.
From doing a "debug voip dialpeer all" I can see that the calls are coming over the sip trunk and matching the dial peer on the GW. I am using 1471 (which is a routable pstn number in the UK) to test this specific gateway
I have attached the running config of the gateway and a copy of the debug
Extract from Debug
Jan 11 16:48:49.303: //-1/xxxxxxxxxxxx/DPM/dpMatchCore: Dial String=1471, Expanded String=1471, Calling Number= Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH Jan 11 16:48:49.303: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer: Result=Success(0); Outgoing Dial-peer=1 Is Matched Jan 11 16:48:49.303: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer: Result=Success(0); Outgoing Dial-peer=2 Is Matched AAVOICEGATEWAY02# Jan 11 16:48:49.303: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer: Result=Success(0); Outgoing Dial-peer=100 Is Matched Jan 11 16:48:49.303: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST Jan 11 16:48:49.303: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin: dialstring=1471, saf_enabled=0, saf_dndb_lookup=1, dp_result=0 Jan 11 16:48:49.303: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=100 2: Dial-peer Tag=2 3: Dial-peer Tag=1
Dial Peers Config
dial-peer voice 1 pots preference 2 destination-pattern .T port 0/0/0 ! dial-peer voice 2 pots preference 1 destination-pattern .T port 0/0/1 ! dial-peer voice 3 voip preference 1 destination-pattern 11111 session protocol sipv2 session target sip-server dtmf-relay rtp-nte sip-notify codec g711ulaw no vad ! dial-peer voice 4 voip preference 2 destination-pattern 11111 session protocol sipv2 session target ipv4:172.16.3.82 dtmf-relay rtp-nte sip-notify codec g711ulaw no vad ! dial-peer voice 5 voip description dummy_DialPeer_For_Primary_CUCM shutdown session protocol sipv2 session target ipv4:172.16.3.81 no vad ! dial-peer voice 6 voip description dummy_DialPeer_For_Secondary_CUCM preference 1 shutdown session protocol sipv2 session target ipv4:172.16.3.82 no vad ! dial-peer voice 100 pots huntstop destination-pattern 1471 port 0/0/1
Cisco Finesse Not Ready - Call Overlap status is very a very common issue seen on Finesse desktop. Agents miss two calls and they are put in Not Ready - Call Overlap status. This is very likely related to CVP server and it's unreachabl...
Lab 1: Cisco Meeting Server Standalone CertificatesLab 2: Cisco Meeting Server Cluster Certificates with Multi-SANLab 3: Multiple Certificates with Multiple CA ServersLab 4: Cisco Meeting Server Cluster Certificates Advanced ScenarioLab 5: Streamer Servic...
Certificates are the first step to deploy Cisco Meeting Server, preparing certificate are very important to enable different services. As a VOIP administrator, mastering the concept of certificates is unavoidable
Using multiple CA servers, instead of a si...
I just finished to write a comprehensive certificates preparation for Cisco Meeting Server Clustering. Through 60 pages I explained in detail, how to create certificates for database cluster, callbridge cluster, certificate chain for webbridge3, certifica...