10-05-2012 02:42 AM - edited 03-16-2019 01:32 PM
Hi guys,
does anyone know how the following dial peers are matched?
dial-peer voice 1 pots
destination-pattern 22
incoming called-number .
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 2 pots
destination-pattern 22
incoming called-number .
direct-inward-dial
port 0/0/1:15
Thanks.
Solved! Go to Solution.
10-05-2012 03:07 AM
DPs of same preference will distribute calls round-robin.
10-05-2012 02:50 AM
Both are matched, both will be used.
To use multiple port, use trunk-group configuration, not multiple DPs.
10-05-2012 02:55 AM
Hi Paolo,
the port is different.
Does it affect the matching process?
The config is for a VWIC3-2MFT-T1/E1.
If all 32 channels on port 0/0/0 are busy, will the calls go to the second one 0/0/1?
Thanks.
10-05-2012 02:59 AM
Calls go to both ports. Use trunk-group for easier configuration and more control.
10-05-2012 03:05 AM
Could you please explain this in detail? ...with both dial peers. i don't really understand how the calls go in/out if 2 ports are used.
Thanks
10-05-2012 03:07 AM
DPs of same preference will distribute calls round-robin.
10-05-2012 03:52 AM
thanks.
10-05-2012 08:22 AM
Thank you for the nice rating and good luck!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: