cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1435
Views
5
Helpful
18
Replies

dial-peer pots incoming redirect

there is a command that is equivalet to the connection PLAR of the voice port, for the dial-peer pots ??.

my problem is that i want to connect an ephone with a specific called isdn number.

the isdn bri haven't DID.

18 Replies 18

well see the attachment

(out call with this PVDM are all ok and are ok if I use bri associated with ivr)

I saw the attachment. The point is that you have enough PVDM resources for (possibly) 2 x BRI, but certainly not for 4.

As mentioned above, you should replace the incompatible PVDM-2 with a PVDM-256k-xx to have all the BRI ports working.

ok tnx

i will check this conf in a new router 2800 series :)

(grazie.. almeno questo in italiano :) )

A PVDM2-256K-xx will be enough. I have 1760 working beautifully with CME and 12.4(4)XC

Problem is that the VIC-2BRI you have is not compatible with the ISR router so you can't reuse them.

Grazie per l'apprezzamento e saluti alla bella Sardegna.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: