cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
362
Views
0
Helpful
3
Replies

Direct dialling outward

spbeck111
Beginner
Beginner

Hi

We have a PRI line with 10 incoming truks and 20 outgoing trunks with a block of 100 DID numbers.

I would like to assign line 2 of all executives phones with a DID number so that they can have direct inward and outward calls via this PRI

I understand how to do the inward part but am confused as to how I route the line 2 calls directly to the PRI in question when they select line 2.

Can anyone advise ?

many thanks and Happy New Year

1 Accepted Solution

Accepted Solutions

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Hi,

You can use a combination of trunk groups and corlist to achieve this...Here is a documen that shows you how to do this..

https://supportforums.cisco.com/docs/DOC-24098

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts

View solution in original post

3 Replies 3

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Hi,

You can use a combination of trunk groups and corlist to achieve this...Here is a documen that shows you how to do this..

https://supportforums.cisco.com/docs/DOC-24098

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts

Thats brilliant

Many thanks for pointing me in the right direction.

I am glad I cound help. Dont forget to rate useful posts by clicking on the stars

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: