cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Disable CNAM for outgoing calls PRI

UC Support
Beginner
Beginner

Hi

Do you know the command to strip the CNAM for outgoing calls, currently I have CUCM <---> H.323 GW with 4 PRI (two telcos), using primary-ni and dms100.

I think the comand is under the serial interface.

Note I want to strip the CNAM not the Caller ID.

The goal is that when I make a PSTN call from my IP Phone the PSTN user doesn't see my name (or company name) just the company number.

Thanks in advance.

Carlo

1 ACCEPTED SOLUTION

Accepted Solutions

acampbell
Advocate
Advocate

Carlo,

Try

no isdn outgoing display-ie

Under the ISDN D-channel

Something like this

!

interface Serial0/0/0:23

noisdn outgoing display-ie
!

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

View solution in original post

1 REPLY 1

acampbell
Advocate
Advocate

Carlo,

Try

no isdn outgoing display-ie

Under the ISDN D-channel

Something like this

!

interface Serial0/0/0:23

noisdn outgoing display-ie
!

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: