08-20-2007 11:25 AM - edited 03-14-2019 11:09 PM
Hi,
I am trying to set up several hunt groups for inbound 800 numbers. I want each hunt group to display on the IP phones screen a specific name and phone number for the person receiving the call knows which number was called.
For example, a caller dials 1-800-555-1234. It hit the hunt group and the 5 phones in the group ring. The phone then displays on the screen the following:
Test 800 Number
18005551234
How do I set this up?
Thanks,
Scott
08-24-2007 01:23 PM
You can try with transfomration mask
08-25-2007 05:19 PM
I would try creating a CTI RP to match the 800# and set the CFA to the Hunt Pilot number. I beleive CM sends the name of station that is forwarding a call from...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide