08-26-2016 07:22 AM - edited 03-17-2019 07:56 AM
Hi
My SIP Service Provider asks me to send the Diversion Header with the phone number who is forwarding a call
to be able to bill the calls correctly.
I tried different things with sip profile to add or modify this header but I never get the "Diversion: xxxxyyy" entry in the SIP message so I guess this info isn't sent from the CUCM to the CUBE.
We have CUCM 10.5.2 (SU2) and we use an ISR4451-X with IOS 15.5-3
What level of debbuging do I need or what do I have to configure on the CUCM to be able to see this entry?
Thank you very much for your help.
Regards,
Pascal
Solved! Go to Solution.
08-26-2016 08:10 AM
On the SIP trunk in CUCM, do you have it set to send the redirecting Diversion headers? It's a checkbox labeled "Redirecting Diversion Header Delivery - Outbound"
08-26-2016 08:10 AM
On the SIP trunk in CUCM, do you have it set to send the redirecting Diversion headers? It's a checkbox labeled "Redirecting Diversion Header Delivery - Outbound"
08-29-2016 01:48 AM
Hi
Yes it is activated.
I did also un IOS update on the SBC to a Cisco suggested release.
isr4400-universalk9.03.16.03.S.155-3.S3-ext.SPA.bin
But still not working. I can't see any Diversion Header in the debug log.
08-29-2016 08:04 PM
Pascal,
Can you please make a test and collect CCM traces along with cssip debug and show run from the GW.
attach the above traces, debugs and output
Br,
Nadeem
08-31-2016 05:31 AM
I'm not sure but I did a second reset of both SIP Trunks and now it works.
Thank's you all for your help.
Regards,
Pascal
08-26-2016 01:39 PM
how is your CUCM and GW connected over is SIP, H.323 ???
If its SIP, can you please take debug ccsip message and check whether you are actually sending or not Diversion header in the SIP Invite Message.
what is the profile you have created did you test the profile was test rule pass through profile tool??
08-29-2016 01:43 AM
Hi Nadeem
Yes it's SIP. I did a debug ccsip messages as well as ccsip events and there is no Diversion Header.
I guess it will not be sent out.
The profile contains only two lines...
voice class sip-profiles 2100
request INVITE sip-header P-Asserted-Identity modify "P-Asserted-Identity:(.*)<sip:\+xxyyzzz(.*)@" "P-Asserted-Identity: <sip:+xxyyzzz\2@"
request INVITE sip-header Privacy modify "none" "id"
Cheers,
Pascal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide