cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
656
Views
0
Helpful
4
Replies

DMA Backup Configuration Issue-Urgent

Yazen Alaa
Beginner
Beginner

I have cucm 7.1.3 , i want to do DMA backup on it , and I have tried many times but unfortunately give me error :

remote file " DMAExportSuccessful03-12-13#18-02" does not exist or cannot read

remote server name or ip : 192.168.50.1

remote file path :  .       and i tried    /

remote file name : DMAExportSuccessful03-12-13#18-02.tar

and i tried withour .tar

remote login : cisco  (it is the same at SFTP)

remote password : 1234 (it is the same at SFTP)

Note : I used FreeFTPD and Mini-SFTP-server

this is SFTP log from FreeFTPD :

03-14-2013 09:02:57 IP 192.168.50.253 SFTP connection attempt

03-14-2013 09:02:58 IP 192.168.50.253 SFTP cisco connected

03-14-2013 09:02:58 IP 192.168.50.253 SFTP cisco is changing dir to / (C:\DMA backup-try\DMAEXPORT\cisco\)

03-14-2013 09:02:58 IP 192.168.50.253 SFTP cisco is changing dir to / (C:\DMA backup-try\DMAEXPORT\cisco\)

03-14-2013 09:02:58 IP 192.168.50.253 SFTP cisco is listing / (C:\DMA backup-try\DMAEXPORT\cisco\)

03-14-2013 09:02:58 IP 192.168.50.253 SFTP cisco is listing / (C:\DMA backup-try\DMAEXPORT\cisco\DMAEXPORT)

03-14-2013 09:02:58 IP 192.168.50.253 SFTP cisco disconnected

may be the problem is from remote file path and file name

how to solve this issue

thanks

4 Replies 4

Yazen Alaa
Beginner
Beginner

Hi All

Any help PLZ ?

Hello,

Can you share the exact steps that you are using, starting from the steps on cucm.

1. Were there any errors when you took the DMA

2. How many MB/GB is the file, can you please a different SFTP server, filezilla etc, any cisco supported SFTP server, if the file is more than 1 GB

3. does the sftp user have read/write privileges.

HTH

Kunal

Also, looks like u have build the cucm server first and then you are restoring.

From what i remember you need to restore the DMA during the installation.

If you are using DRS GUI to restore DMA i do not think it will work.

If you had no errors on taking the DMA, restore DMA during the installation process, that should work

HTH

Kunal

Anas Abueideh