cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
574
Views
0
Helpful
2
Replies
Highlighted
Beginner

Does CME 8.0 have a compatible version of CUE for a 2851 with an ISE?

I have a 2851 that I need to upgrade and I'm looking at putting CME 8.0 on it, but have not been able to find a document that

states whether there is a compatible version of CUE that can be installed on the Integrated Service Engine. Has anyone been able to try this, or have a link to a document that states compatibility?

2 REPLIES 2
Highlighted
Contributor

Re: Does CME 8.0 have a compatible version of CUE for a 2851 wit

I am not aware of needing any special version of CUE.  I have 8.0 on a 2851 running with CUE 7.0.  7.1 should be fine too.

My problem with CME 8 is that the admin GUI is broken and I think I am not alone: https://supportforums.cisco.com/thread/303217

It doesn't really have any new features either so you might just want to stay with something more stable..

Here is CME new features:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html

Cisco Unified CME and Cisco IOS Software Version Compatibility Matrix:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

-- please remember to rate and mark answered helpful posts --
Highlighted
Beginner

Re: Does CME 8.0 have a compatible version of CUE for a 2851 wit

Thanks for the reply, this helps alot. I think I should just stay on version 7.0 for now.