download Bootable_UCSInstall_UCOS_10.5.1.10000-7.sgn.iso

[frank3333]

Hi,

Where can i download cucm 10.5 bootable iso.

i can see only  non bootable image  on below softwr download page.

https://software.cisco.com/download/release.html?mdfid=285963825&softwareid=282074295&release=10.5(1)SU1a

Thanks.

[Manish Gogna · Accepted solution]

Bootable iso images are not available for download from cisco.com. You need to order them from Cisco through proper channels, your Cisco Account team should be able to assist with this.

HTH

Manish

[frank3333]

Hi Manish,

Please see the response from cisco (via cisco local partner).

"Based on the resources, I found that for the CUCM migration, Migration procedure requires licensing for Unified Communications Manager 10.5(1). The licenses required for this migration are:

Unified Communications Manager Release 10.5(1)

Only one license is required for the CUCM migration.However, To prepare for the upgrade, you need to download  Cisco Unified Communication Manager Release 10.5(1) bootable image software from the following location:

http:/​/​software.cisco.com/​download/​navigator.html?mdfid=268439621&flowid=37562

Please see this referenced on the links below.

Refer to the Migration Preparation Checklist

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/ucmapMigrate/10_5_1/CUCM_BK_M24251C0_00_migrate-procedure-for-cucm_1051/CUCM_BK_M24251C0_00_migrate-procedure-for-cucm_1051_chapter_00.html#CUCM_RF_L530C63B_00

Please respond to this email and let me know if I have completely answered your question. If not, I will be happy to continue working with you. However, if I have answered all of your questions, then I will be closing your case.

They have provide the link to download bootable  iso but i cannot see any bootable iso.

Thanks,

[Aman Soi · Accepted solution]

Hi,

If u place the order for upgrades through PUT and opt for E-Delivery, then, u would get Bootable.

Please refer the attached snapshot with second line item.

regds,

aman

[frank3333]

Thanks Aman.