I have an ISR4331 with 4xFXO and PVDM4-32, but PVDM4 is in APP_DNLDING and reset state. Already reset the PVDM and rebooted the router but no luck. Is there anyone who can help on this? The IOS-XE version is 16.06.05.
Hi Rob, it is different issue, The PVDM4 state were up before, not it is stuck in reset state.
ISR1#hw-module subslot 0/4 reload %Command cannot be executed. Card in subslot 0/4 is already reloading (operational status = booting) - use the 'force' option to override ISR1#hw-module subslot 0/4 start %Command cannot be executed. Card in subslot 0/4 is already started (operational status = booting)
DSP groups on slot 0/1 slot id 1 dsp 1: State: APP_DNLDING, firmware: 0.0.0 Max signal/voice channel: 8/8 Max credits: 120, Voice credits: 120, Video credits: 0 num_of_sig_chnls_allocated: 4 Transcoding channels allocated: 0 Group: FLEX_GROUP_VOICE, complexity: FLEX Shared credits: 120, reserved credits: 0 Signaling channels allocated: 4 Voice channels allocated: 0 Credits used (rounded-up): 0 Slot: 0/1 Device idx: 0 Dsp Type: DM8147
DSP groups on slot 0/4 slot id 4 dsp 1: State: RESET, firmware: 0.0.0 Max signal/voice channel: 32/32 Max credits: 480, Voice credits: 480, Video credits: 0 num_of_sig_chnls_allocated: 0 Transcoding channels allocated: 0 Group: FLEX_GROUP_VOICE, complexity: FLEX Shared credits: 480, reserved credits: 0 Signaling channels allocated: 0 Voice channels allocated: 0 Credits used (rounded-up): 0 Slot: 0/4 Device idx: 0 Dsp Type: SP2700
Hello Admin Community!
I’m recruiting participants for an upcoming study looking at large meeting troubleshooting in Control Hub. If you’d like to participate, please fill out this quick, 2 min. survey. Thanks! https://www.surveymonkey.com/r/...
Don't you just hate having to run RTMT in a virtual machine, well here it runs in an app for mac. I have complied a version for CUCM 14.x ( from a version I got for 11.x ) It works on older versions also. Here it is https://haffi.is/rt...
To participate in this event, please use the button to ask your questions
Tour of the Real-Time Monitoring Tool
Have any questions about the Real-Time Monitoring Tool?
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to...
This event will have place on Tuesday 20th, April 2021 at 10:00 hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees wil...
The purpose of this document is to provide troubleshooting insight into a well-known issue for the IM&P nodes when going to the Presence Topology Page and seeing all the services as Unknown, even though they are started as shown on the ...