DTMF tones only recognized with debugs on in gateway
Some analog phones were added to a VG224 and the DTMF tones are not recognized after the call is established. I ran some debugs on the voice gateway and the tones were recognized. when I turn the debugs off, the tones are not recognized. I didn't believe it at first but I tested this several times, with debugs on, tones are recognized, with debugs off, the tones are not recognized. Is this some bug? Any idea what's going on here? Is there some other parameter that needs to be enabled? Below is all the information. Thanks
This document is intended to receive any new ideas for TAC to create new useful walkthrough videos to help set up deployments, integrations, etc.
Feel free to share any feedback about new walkthrough videos you consider useful, please share your o...
Configuring Cloud Connected PSTN (CCP) – Easy as 1-2-3!
STEP 1: PREPARE
Before you can configure your CCP in Control Hub, you must procure PSTN services from an authorized Webex Calling CCP Partn...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about how to read Cisco Unified Communications trace files. In this session, Cisco D...