cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7632
Views
0
Helpful
11
Replies

DVD ISO image 8.6(2) for callmanager be6k ?

Hi All

Where can I find a 8.6(2) image for a be6k ?

Regards

Philippe

11 Replies 11

Hi,

You can get the ISO from this link: http://software.cisco.com/download/release.html?mdfid=283783676&flowid=26062&softwareid=282074295&release=8.6(2a)SU2&relind=AVAILABLE&rellifecycle=&reltype=latest

You'll need a CCO account to be able to download the ISO File.

Regards

Please rate all useful posts
Favor calificar todos las respuestas útiles.
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Thanks but I need a bootable version, we start from scratch . . . 

Regards

Philippe

Hi Phillippe

In that case when you purchase CUCM or an upgrade you should get the media phyically, or via eDelivery.

Have you made a purchase?


Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

We purchased directly from Cisco but there was no dvd for the callmanager

That's our problem

Hello Friends,

How many and what type of pre loaded ISO does the BE 6000M/H have, in the datastore, for default? 

I´m planning to install a BE 6000M version 10 and I need that information.

You can convert the ISO to a bootable CD but is not suported by CISCO and it's not recomended for a production enviorment.

Like Aaron said, the recomended way is to buy the licence.

Regards

Please rate all useful posts
Favor calificar todos las respuestas útiles.
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Can you explain me how to do this ?

We have the PAK license, our problem is that there is no physical dvd in the box.

Regards

Philippe

Hi,

I recomended you contact a Cisco representative for your country. They will help you to get a DVD for Call Manager.

This link will help you:

http://www.cisco.com/web/siteassets/contacts/international.html#~tab-b?reloaded=true

Regards

Please rate all useful posts
Favor calificar todos las respuestas útiles.
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

If you ordered eFulfillment SKUs (they begin with L-) then you will be given the option to download a bootable ISO when you activate the PAK code for a license. If you ordered physical media then Cisco will be shipping your DVDs in white 8.5x11 enevelopes. These will also include the paper PAKs to obtain the license file. Always maintain your PAK codes in a safe place after installation; they act as your serial numbers.

Ordering direct from Cisco is rather unlikely unless you are channel partner with DVAR status. Whomever processed your order can assist further if you have not obtained your physical or electronic PAKs.

Please remember to rate helpful responses and identify helpful or correct answers.

I didn't know end custormer could buy directly from Cisco...

Please rate all useful posts
Favor calificar todos las respuestas útiles.
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: