05-07-2014 01:52 AM - edited 03-16-2019 10:42 PM
Hey
I'm asking for some informations about DX-650 if any one have responses :
- DX-650 support IPMA ??
- DX-650 support Mobile Connect ??
Best Regards
05-07-2014 02:01 AM
Yes, it does.
you can refer the datasheet under calling feature support , you can get all the supported features.
regds,
aman
05-07-2014 02:03 AM
Thank you
05-07-2014 02:04 AM
Hi
I already configure IPMA, but it doesn't show icons like other phones, is it normal ??
05-07-2014 02:25 AM
Hi Youssef,
I have not configured IPMA on this particular model but I suppose the icons[DND] should appear .
regds,
aman
05-07-2014 02:26 AM
05-07-2014 05:35 AM
Hi ,
you can refer the Quick Start Guide for DND
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cdce/dx600/qs/10_1_1/english/dx650qs1011en.pdf
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cdce/dx600/user/10_1_1/english/DX60_BK_C6E8877C_00_cisco-dx600-user-guide-10_1_1.pdf
regds,
aman
05-07-2014 03:13 PM
THANK YOU
09-12-2018 05:36 AM
hello
i have the same probelm (dx650 android mode ) and IPMA service
i have cucm version 11.5 and no iconn displayed on DX manager phone
other type of phone (9971) working good
any hepl please
best regards
09-12-2018 08:15 AM
DX650 is NOT supported with IPMA
05-07-2014 02:03 AM
Hi Erraki,
you can refer the datasheet link
http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/desktop-collaboration-experience-dx650/data_sheet_c78-726888.html
regds,
aman
05-07-2014 02:21 AM
Hi
for mobile connect how i could configured is t the same like 7962 or it need to configure an application ???
Best Regards
01-28-2015 08:08 AM
Hello all,
I am configuring a DX650 for IPMA with the last firmware versión (sipdx650.10-2-3-26) for CUCM 10.5.2 and I have a couple of problems:
•Icons does not appears on phone display
•In the user guide says that, in settings menu, I can change the assitant configuration, but in my case does not appears those options.
•The IPMA phone service have not effect on the phone
if eventually you had implemented this, would be grateful to know if you have had the same problem
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Hi aman
for mobile connect how i could configured is t the same like 7962 or it need to configure an application ???
Best Regards
youssef