I am having an issue when my phones register to the router in E-SRST mode. I am not able to call the phones internally; I just get a busy signal. The extensions on the 8841 phones for example look like \+12145551212. We would like to be able to dial the extensions local to the site via 4 digits so I would need to prepend the +12145551212 but where do I configure that? I am using one voice registration pool for the whole subnet the phone are in do I build that in there?
One solution for this will be to create a Dial-peer with higher preference than the ephone DN and then apply a translation rule to manipulate the digits however the way you want. Hope this helps
dial-peer voice 1002
voip destination-pattern 1019
preference 0 <<=====This dial peer has precedence and will match first.
preference 1 <<======Configure lower preference for prebuilt DN.
Hello,FYI, we have posted on our website configuration instructions for integration of the CIsco Unified Border Element (CUBE) with TransNexus ClearIP software.We also have provided a high-level integration overview on our website to explain how the integ...
AI is going to change many tasks and, as a result, many jobs.
In this podcast on artificialintelligence in the workplace, we explore how jobs may change--and what companies can do to keep workers ahead of the shift:
Check out the podcast:...
Join this featured IT Admin Control Hub session where you’ll hear about the improved Meeting diagnostics capability in Control Hub which provides IT Admins richer insights about their meetings, the participants and the quality of service. See metrics to h...