cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
435
Views
0
Helpful
3
Replies
Kent Drugge
Beginner

Edit: efxs ports not in use? How can I remove them ?

We had a vendor set up a lot of our equipment initially. All the routers have 1 or 2 of the NIM cards mainly using the FXOs. I have a couple of routers that list all these efxs ports, which are really a pain, I don't need to see them. They don't show on the majority of my routers, how can I delete these references ? Is that possible ? 4400 guide wasn't much help.

This is CUCM 10.5 system    there are no ephones in the system.

NIM-2 FXS / 4 FXO

 

4431.LRCard.1#show voice port sum

                                                                        IN              OUT

PORT         CH  SIG-TYPE  ADMIN OPER  STATUS      STATUS      EC

========= ==  =======  =======  ===== =======    ========  ==

0/1/0           --      fxs-ls          up        dorm      on-hook     idle            y

0/1/1           --      fxs-ls          up        dorm      on-hook     idle            y

0/1/2           --      fxo-ls          up        dorm     idle             on-hook     y

0/1/3           --      fxo-ls           up       dorm     idle             on-hook     y

0/1/4           --      fxo-ls          up        dorm      idle            on-hook     y

0/1/5           --      fxo-ls          up        dorm     idle            on-hook      y

50/0/1         1     efxs            up         up        on-hook    idle            y

50/0/2         1     efxs            up         up        on-hook    idle            y

~                             ~                                            

50/0/99       1    efxs            up         up       on-hook      idle           y

50/0/100     1    efxs            up         up       on-hook     idle            y

Thanks !

1 ACCEPTED SOLUTION

Accepted Solutions

Check your IOS running config. There has to be ephones or ephone-dns. 

View solution in original post

3 REPLIES 3
Mohammed al Baqari
VIP Advisor

efxs ports are a representation of ephones created in your CME. You can't delete them. If you delete ephones then they disappear. 

Hi Mohammed,

My apologies, I edited my post, this is CUCM 10.5 and there are no ephones.  There are IP  phones set up in the system via ccm-manager / mgcp process.

Check your IOS running config. There has to be ephones or ephone-dns. 

View solution in original post

Content for Community-Ad

Spotlight Awards 2021