cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6206
Views
15
Helpful
3
Replies
Explorer

Enable Web Access on CME for IP Phones

Is there a way to enable Web access on ip phones in Communications Manager Express?

CME Version- 8.5

Phone Model- 7965

Phone Load- SCCP45.9-1SR1S

This doesnot seem to be configurable on the phone and I have not located a way to do this in the GUI.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Enable Web Access on CME for IP Phones

Hi Chris

It's something like this:

You can enable this for all phones like as follows (this will just insert the webAccess parameter into the vendor specific section of the XML config file the phones load as they boot - the webAccess bit may be case sensitive).

Telephony-service

Service phone webAccess 1

Create cnf-files

Then restart your phones...

May well be webAccess 0, can't quite remember which way round it was..

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

3 REPLIES 3
Highlighted

Enable Web Access on CME for IP Phones

Hi Chris

It's something like this:

You can enable this for all phones like as follows (this will just insert the webAccess parameter into the vendor specific section of the XML config file the phones load as they boot - the webAccess bit may be case sensitive).

Telephony-service

Service phone webAccess 1

Create cnf-files

Then restart your phones...

May well be webAccess 0, can't quite remember which way round it was..

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

Highlighted
Beginner

Re: Enable Web Access on CME for IP Phones

Hello Aroon,

  How enable web GUI access with sip phones on CME ? ... I cant do this

Highlighted
Explorer

Enable Web Access on CME for IP Phones

That was it.

webAccess 0 did it.

Thanks!

CreatePlease to create content