Error with incoming and outgoing calls.

[jaiswalok]

Hi,

I am having CCM 7.x and 3845 gateway router. I am running H.323 on gateway router.

however the calls are not getting mature. attached is the error for incoming and outgoing calls both.

Service provider is forwarding only last 3 digits and i am prefixing a "6" to this incoming digits under H.323 gateway configuration.

But the calls are working fine with MGCP.

thanks

[sebastiandm]

Hi,

Can you post a sh run.

[KonradStepniewski]

Look like it's L1 problem: Cause i = 0x80AC18 - Requested circuit/channel not available

Do you have configured?:

voice service voip

allow-connections h323 to h323

Check: show isdn service and debug cch323 for more information.