08-13-2020 02:11 AM
Hi All, Need some advice regarding expressway compatibility with CUCM version 10.5. Yes I know the version is old and needs upgrading but the customer is not in a position to do so just now but does require MRA. The matrix says minimum is 8.1, recommended 8.2 but has anyone had 12.5 working with CUCM V10.5 or know a definite answer as Cisco themselves are saying different things?
Many Thanks
Paul
Solved! Go to Solution.
08-13-2020 07:36 AM
This is already covered in the documentation
Special attention to the APNS minimum requirements if you are going to use Apple devices over MRA.
08-13-2020 02:29 AM
08-13-2020 02:43 AM
Thanks Mohammed, Could you please verify the exact version of expressway and CUCM you are using then please?
Thanks
08-13-2020 03:04 AM
08-13-2020 03:12 AM
Hi Mohammed, So just to confirm. Expressways was already version 12.5 and working before you upgraded CUCM from version 10.X?
Sorry for asking but its really critical for me.
Thanks
Paul
08-13-2020 03:56 AM
08-13-2020 04:02 AM
Thanks Mohammed
08-13-2020 07:36 AM
This is already covered in the documentation
Special attention to the APNS minimum requirements if you are going to use Apple devices over MRA.
08-13-2020 07:41 AM
Mate, You're a star. Why I didnt think to look there is crazy.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: