Solved: Re: FAC is supported for third party sip devices?

moises.gomez · ‎06-05-2018

Hi Cisco community,

Any one know if FAC is supported by sip third party devices?

I have seen a lot of comments related to but those are from past years and the answer is NO, but maybe this feature is now available we are in the 2018!!!!

Jaime Valencia · ‎06-05-2018

No, answer remains the same.

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎06-05-2018

No, answer remains the same.

HTH

java

if this helps, please rate

moises.gomez · ‎06-05-2018

thanks man!!!

cheers!

Ratheesh Kumar · ‎06-05-2018

That’s one of the disadvantages of using 3rd party phones in CUCM. Missing features in big way !!!

Better to go with Cisco 3900 phones instead

Hope this helps

Cheers
Rath!

***Please rate helpful posts***

moises.gomez · ‎06-05-2018

Thanks Rath!

Do you have any document were been explained all this features unsupported?

Ratheesh Kumar · ‎06-05-2018

I don't think you will get that well documented from Cisco side. It's basically the other way around. Most of the 3rd party vendors publish the tested features in their interoperability guides. Cisco doesn't guarantee any feature support when it comes to deploying/configuring 3rd party phones with CUCM and I personally think it's a bad idea to use 3rd party phones with CUCM unless you have a specific requirement.

Hope this Helps
Cheers
Rath!

***Please rate helpful posts***

You have to run thru the forums and shared experiences.