Fail to Change the Interdigit Timeout Value in Cisco Gateway

[Luis Manuel Orozco]

Hello Everybody

I have this call flow:

PSTN (FXO) --> TCL File | Gw (H323) --> CUCM --> IP Phone

I have next Dial-peer in Gateway whith .T pattern:

dial-peer voice 101 voip
 translation-profile outgoing test
 destination-pattern .T
 session target ipv4:10.1.1.12
 dtmf-relay h245-alphanumeric
 no vad

Please your help to reduce the interdigit timeout value because 10 seconds are too long.

I have tried this:

In the voice port:

voice-port 0/1/0
 timeouts interdigit 2

Under Telephony Service:

telephony-service
 timeouts interdigit 2

Under H323:

h323
  h225 timeout t302 2

No option worked. Some suggestion??

Thanks in advance!

[Jayanth Velkuri]

what is the role of tcl script ?

what happens if you call the ip phone directly ?do you face the same delay 

[Luis Manuel Orozco]

Hello javelkur, thanks for answer.

The TCL is the Cisco TCL IVR Script (its-CISCO.2.0.2.0.tcl).

If I call the ip phone directly is the same issue.

Thanks in advance.