cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
839
Views
0
Helpful
5
Replies

Fax by SIP Trunk

brunofalco
Beginner
Beginner

Hello,

I have a CUCM, and a SIP Trunk with Avaya. All the calls are done by this SIP Trunk, and it is working normally.
I have one ATA (Audio Code), that is connected in a Device Fax.


Please, I would like to know if is possible to send a Fax with this ATA using the SIP Trunk!!

Regards,

Bruno

5 REPLIES 5

Mohammed Khan
Cisco Employee
Cisco Employee

Hi

supported call flow refer below link.

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/115742-fax-modem-call-flows-00.html#anc10

HTH,

Regards,

Mohammed Noor

Hi Mohammed,

 

Tks for the infos.

But I´m using a non Cisco ATA....it is from Audio Code.
And, I´m not using a VG, or a GW.

The call flow is ATA >> CUCM >> SIP Trunk

Is it possible??


Regards,

Bruno

Hi brunofalco,

Is AudioCode ATA talking to CUCM on SIP. Should work.

Regards, 

Mohammed Noor

Mohammed ,

But do I need some specific configuration?

I have created a SIP Trunk, SIP Profile, sip trunk security profile.... 

MTP should be unchecked

Regards,

Mohammed Noor
 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: