02-12-2015 06:35 AM - edited 03-17-2019 01:56 AM
Hello,
I have a CUCM, and a SIP Trunk with Avaya. All the calls are done by this SIP Trunk, and it is working normally.
I have one ATA (Audio Code), that is connected in a Device Fax.
Please, I would like to know if is possible to send a Fax with this ATA using the SIP Trunk!!
Regards,
Bruno
02-12-2015 08:21 AM
Hi brunofalco,
You can used ATA to connect and send fax.
For additional info on supported call flow refer below link.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/115742-fax-modem-call-flows-00.html#anc10
HTH,
Regards,
Mohammed Noor
02-12-2015 09:35 AM
Hi Mohammed,
Tks for the infos.
But I´m using a non Cisco ATA....it is from Audio Code.
And, I´m not using a VG, or a GW.
The call flow is ATA >> CUCM >> SIP Trunk
Is it possible??
Regards,
Bruno
02-12-2015 09:37 AM
02-12-2015 09:44 AM
Mohammed ,
But do I need some specific configuration?
I have created a SIP Trunk, SIP Profile, sip trunk security profile....
02-12-2015 09:48 AM
MTP should be unchecked
Regards,
Mohammed Noor
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide