Fax to email with microsoft cloud 365

[iptsupport]

Hello , 

One of my clients upgraded  their exchange to outlook.office365.com . 

Current configuration

fax receive called-subscriber $d$
fax interface-type fax-mail
mta send server 
mta send subject Incoming Fax Message
mta send with-subject $s$
mta send postmaster 
mta send mail-from hostname 
mta send mail-from username $s$
mta send return-receipt-to hostname
mta receive maximum-recipients 
!
application
 service onramp flash:app_faxmail_onramp.2.0.1.3.tcl
 !
 service fax_only flash:app_fax_detect.2.1.2.2.tcl
  param prompt flash:
  param mode default-fax
  param account-id-method ani
 !

Do you know what I need  to change in order to make it work ? 

I didn't find any documnets . 

Thnx 

[Dennis Fogler]

Looking at the configuration it looks like you are using the Cisco "on ramp" faxing application.   There should be an entry in the configuration for either the mail server ip address or FQDN.   That is most likely what you will need to change.   I have attached a link to a configuration document for the on ramp service.

http://www.cisco.com/c/en/us/support/docs/voice/fax-modem-over-ip/47763-onramp-faxing.html

Let me know if this helps.   -Dennis