cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1031
Views
0
Helpful
5
Replies

Firmware Upgrade issue - 7962G from SCCP42.9-3-1-SR1-1S to SIP

Suvenduji
Beginner
Beginner

Dear Experts!!

This is my first query on this forum.

I am trying to upgrade a brand new Cisco 7962G from SCCP42.9-3-1-SR1-1S to SIP 8.5.3 or 8.5.4.

I am not using UCM and instead using TFTP server.

In the past (approx. 12 months back)  I was able to upgrade the 7962G phones to SIP 8.5.3 but the new phones complain with an error "Load rejected HC". I tried to upgrade it to a higher version 9-3-1SR3-1 but the proxy ports are showing null values and not able to register with my SIP registrar (3rd party non-Cisco).

Is there any change on the new 7962G compared to the previous ones available a year back?

Any advice would be great help.

Many thanks in advance.

Regards,

Suvendu


2 Accepted Solutions

Accepted Solutions

Gordon Ross
Engager
Engager

Yes, there has been a hardware change on some devices which forces the use of later versions of firmware.

See this Cisco document:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7900_series/firmware/9_3_1SR1/release_notes/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series_chapter_00.pdf

GTG

Please rate all helpful posts.

Please rate all helpful posts.

View solution in original post

Hi,

Check if your current hardware falls under this category

Phone

Hardware Version

Cisco Unified IP Phone 7942G

15.0 and higher

Cisco Unified IP Phone 7962G

15.0 and higher

Cisco Unified IP Phone 7945G

13.0 and higher

Cisco Unified IP Phone 7965G

13.0 and higher

Cisco Unified IP Phone 7975G

12.0 and higher

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7900_series/firmware/9_3_1SR1/release_notes/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series_chapter_00.html

Regards,
Nishant Savalia

Regards, Nishant Savalia

View solution in original post

5 Replies 5

Gordon Ross
Engager
Engager

Yes, there has been a hardware change on some devices which forces the use of later versions of firmware.

See this Cisco document:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7900_series/firmware/9_3_1SR1/release_notes/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series_chapter_00.pdf

GTG

Please rate all helpful posts.

Please rate all helpful posts.

Hi,

Check if your current hardware falls under this category

Phone

Hardware Version

Cisco Unified IP Phone 7942G

15.0 and higher

Cisco Unified IP Phone 7962G

15.0 and higher

Cisco Unified IP Phone 7945G

13.0 and higher

Cisco Unified IP Phone 7965G

13.0 and higher

Cisco Unified IP Phone 7975G

12.0 and higher

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7900_series/firmware/9_3_1SR1/release_notes/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series/P790_BK_R4E1E768_00_rn-9_3_1_sr1-7900-series_chapter_00.html

Regards,
Nishant Savalia

Regards, Nishant Savalia

Hi Nishant/Gordon,

Thanks for your responses. I managed to upgrade the firmware from SCCP to SIP.

However, Proxy Port on my phone is empty and possibly as a result of this it's not sending any SIP registration messages. Register with Proxy flag is set to True and SIP Line is configured with extension and proxy IP.

Please see the phone information I retrieved from the phone post upgrade.

Am I missing something here?

Phone DN7492
App Load IDjar42sip.9-3-1ES26.sbn
Boot Load IDtnp62.9-3-1-57.bin
Version*SIP42.9-3-1SR4-1S*
Expansion Module 1
Expansion Module 2
Hardware Revision16.0
Serial NumberFCH173084JX
Model NumberCP-7962G
Message WaitingNo
UDIphone
Cisco Unified IP Phone 7962G, Global
CP-7962G
V15
FCH173084JX
Time5:40:22a
Time ZoneGreenwich Standard Time
Date26-01-14
System Free Memory6705824
Java Heap Free Memory1128836
Java Pool Free Memory245024
FIPS Mode EnabledNo


Regards,

Suvendu

Please note, I am not using Cisco UCM. I am trying to register the phone with a 3rd party SIP Server.

Upgraded SIP firmware version is - SIP42.9-3-1SR4-1S

Thought of adding these points which might be helpful to make any suggestion.

Dear Gordon,

As per my previous post, I managed to upgrade the firmware to 9.3.1 (SIP42.9-3-1SR4-1S) based on your/Nishant's input.

However, my phone is not generating any SIP registration messages. Line1 and Line2 are configured with correct SIP server IP details however SIP proxy port is empty. Register with proxy flag is set to true. I am trying to register with a 3rd party SIP proxy.

Seems new 7962G won't allow you to change the SIP proxy port via Phone Settings.

I am using below SEPxxxx.cnf.xml file configure the phone line. Anything wrong here?

Please advise. We are stuck with lots of new phones where as all OLD phones are working fine.

  true

  SIP

  user

  pass

 

   

      D-M-YA

      BST

     

       

          NTP SERVER IP

          Unicast

       

     

   

       

     

       

                   

           

              2000

              5060

              5061

           

            IP ADDRESS OF 3rd party SIP SERVER

         

       

     

   

 

 

   

     

      5060

     

     

     

     

      true

   

   

      true

      x-cisco-serviceuri-cfwdall

      x-cisco-serviceuri-pickup

      x-cisco-serviceuri-opickup

      x-cisco-serviceuri-gpickup

      x-cisco-serviceuri-meetme

      x-cisco-serviceuri-abbrdial

      false

      2

      true

      true

      2

      2

      0

      true

   

   

      6

      10

      180

      60

      5

      120

      120

      5

      500

      4000

      70

      false

      None

   

    1

    false

    true

    false

    true

    g729a

    101

    3

    avt

    false

    false

    3

   

    1

    false

    15000

    10

    false

    16384

    32766

   

     

        9

        7492

        IP ADDRESS OF 3rd party SIP SERVER

        5060

        7492

        7492

       

          1

       

        3

       

       

        false

        1

       

        4

        5

        7492

       

          true

          false

          true

          true

       

                 

   

    5060

    184

    0

    DRdialplan.xml

    SK50719900-3bee-4594-bc3f-6400e1a33bf0.xml

 

 

    cisco

    true

    2

 

  SIP42.9-3-1SR4-1S

 

    false

    false

    0

    1

    0

    0

    0

    0

    0

    1,7

    08:00

    10:30

    01:00

    0

    1

   

 

  1136932173-57191cee-5ffc-4342-b286-4246b4991890

 

    English_United_States

    1

    en_US

    1.0.0.0-1

    iso-8859-1

 

  United_States

 

    United_States

    64

    1.0.0.0-1

 

  1

  0

 

 

 

 

 

 

 

  96

  0

  96

  4

  0

 

   

      3804

   

 

 

  false


Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers