Force Authorization code in CME

[owaisqadri]

Dear all,

i need help is there any way to configure FAC in CME 7.0.as i need to block international access on pots & voip dail peers  using FAC code  all the time not only after office hrs.

i have gone through all the doc related to call blocking but while configuring the same. i face below mentioned issue

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html

1)  how can I block the dial peer for all times. The option I have is to restrict only during specified timings.

2) According to the document I configured "login" in the template, and the login does work, but it does not matter whether I am logged in or not, the calls are still going through.

I would appreciate if some one has alreday done this & help me out ..

[clileikis]

Hi there,

Forced Authorization Codes were introduced in CME 8.5 and later:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html#wp1011721

Feature Name	Cisco Unified CME Version	Modification
Forced Authorization Code	8.5	Introduced the FAC feature.

HTH,

Chris

[owaisqadri]

I know this feature is avialable in 8.5 version , but is there any workaround for this in 7.0 version.

[ronpatel]

Hi

As a workaround, You can use script mentioned in below link. Name of script is " Clid_authen_collect.tcl "

http://www.cisco.com/en/US/docs/routers/access/as5350/software/feature/guide/pull_ivr.html#wp1021162

Please note :- The scripts are not supported by TAC.

regards

Ronak Patel

[owaisqadri]

Thanks Ronak for your valuable inputs..

but when i try to put below mentioned cmmd in my cme  router there is no such cmmd available my CME IOS verison is 15.0 M7

call application voice

[ronpatel]

hi

Command is changed use following command.

Router(config)#application

Router(config-app)# service ?

Regards

Ronak Patel