How do I forward incoming calls from ISDN to VoIP?
We have a few numbers which are terminated on our ISDN 2 and 30 trunks and I'd like to forward them to a VoIP server.
We're running Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1) with CallManager Express.
If someone could take a look at the following dial-peer config and point out the issues, that would be great.
So, basically, all calls arriving onISDN for 123456789 should be forwarded to 123456789 but then over VoIP.
dial-peer voice 2001 pots description From ISDN incoming called-number 123456789 port 0/3/0:15 !
dial-peer voice 2002 voip description To VoIP Server destination-pattern 123456789 session protocol sipv2 session target ipv4:22.214.171.124:5060 session transport udp voice-class sip dtmf-relay force rtp-nte voice-class sip profiles 1 dtmf-relay rtp-nte codec g711alaw no vad !
The 1st thing you need to do is to find out what signalling digits are actually being received from the CO on your ISDN link. I doubt very much that you will be receiving 9 digits, usually more like 6 or 4.
Try a q931 debug and make a call externally to the target number
Hopefully you should see an incoming call setup which will display the digits you are receiving
term mon debug isdn q931
When finished no debug isdn q931
Once you know the digits you can then transpose to what ever destination number you need via translation rules etc on your router or in you call server at the other end of the voip.
The digits received are less than 9, this was just an example to hide our public PSTN numbers. The called number (call) needs to be forwarded 1on1 to the VoIP server so I don't need any translation rules. I'm just looking for verification if this config is valid and would work, before I apply it. Any faulty changes applied would render our company unreachable, which is a no no :)
The destination device is a VoIP server (AudioCodes SBC) which is connected to our Skype For Business servers.
I haven't tested this configuration yet, since any changes applied are immediately applied. So that's why I'd like to verify this config before I apply it, because an error would result in our company not being reachable by phone.
Certificates are the first step to deploy Cisco Meeting Server, preparing certificate are very important to enable different services. As a VOIP administrator, mastering the concept of certificates is unavoidable
Using multiple CA servers, instead of a si...
I just finished to write a comprehensive certificates preparation for Cisco Meeting Server Clustering. Through 60 pages I explained in detail, how to create certificates for database cluster, callbridge cluster, certificate chain for webbridge3, certifica...
Translation Pattern is the most important tool in the Call Routing Process for Cisco Unified Communication manager. Largely used in the Globalized Dial Plan, inter-site and intra-site dialing, and a powerful tool to solve the problem of overlapping direct...
Customer relationship management (CRM) tools are essential for managing relationships, collaborating with your team, and closing deals. The most forward-thinking CRM companies now integrate artificial intelligence (AI) into their software. The combination...